Computed axial tomography (CAT), computer-assisted tomography, computed tomography, CT, or body section roentgenography is a medical imaging method, where digital processing is used to generate a three-dimensional image of the internals of an object from a large series of two-dimensional X-ray images taken around a single axis of rotation. The word "tomography" is derived from the Greek tomos (slice) and graphia (describing).
Although most common in healthcare, CT is also used in other fields, e.g. nondestructive materials testing.
The CT system was invented in 1972 by Godfrey Newbold Hounsfield of EMI Central Research Laboratories (now Sensura  (http://www.sensaura.com/) owned by Creative Technology Ltd.) using X-rays. Allan McLeod Cormack of Tufts University independently invented the same process and they shared a Nobel Prize in medicine in 1979 (See also history of brain imaging). The first scanner took several hours to acquire the raw data and several days to produce the images. Modern multi-detector CT systems can complete a scan of the chest in less time than it takes for a single breath (useful if the patient cannot hold his/her breath) and display the computed images in a few seconds.
X-ray slice data is generated using an X-ray source that rotates around the object; X-ray sensors are positioned on the opposite side of the circle from the X-ray source. Many data scans are progressively taken as the object is gradually passed through the gantry. They are combined together by the mathematical procedure known as tomographic reconstruction.
Newer machines with faster computer systems and newer software strategies can process not only individual cross sections but continuously changing cross sections as the gantry, with the object to be imaged, is slowly and smoothly slid through the X-ray circle. These are called helical or spiral CT machines. Their computer systems integrate the data of the moving individual slices to generate three dimensional volumetric information, in turn viewable from multiple different perspectives on attached CT workstation monitors.
In conventional CT machines, an X-Ray tube is physically rotated behind a circular shroud (see the image above right); in the less used electron beam tomography (EBT) the tube is far larger, note the internal funnel shape in the photo, with a hollow cross-section and only the electron current is rotated.
The data stream representing the varying radiographic intensity sensed reaching the detectors on the opposite side of the circle during each sweep—360 degree in conventional machines, 220 degree in EBT—is then computer processed to calculate cross-sectional estimations of the radiographic density, expressed in Hounsfield units.
CT is used in medicine as a diagnostic tool and as a guide for interventional procedures. Sometimes contrast materials such as intravenous iodinated contrast is used. This is useful to highlight structures such as blood vessels that otherwise would be difficult to delineate from their surroundings. Using contrast material can also help to obtain functional information about tissues. See diagnostic uses of a CT scan for more detail.
Pixels in an image obtained by CT scanning are displayed in terms of relative radiodensity. The pixel itself is displayed according to the mean attenuation of the tissue that it corresponds to on a scale from "1024 to +3071 on the Hounsfield scale. Water has an attenuation of 0 Hounsfield units (HU) while air is "1000 HU, bone is typically +400 HU or greater and metallic implants are usually +1000 HU.
Improvements in CT technology have meant that the overall radiation dose has decreased, scan times have decreased and the ability to reconstruct images (for example, to look at the same location from a different angle) has increased over time. Still, the radiation dose from CT scans is several times higher than conventional X-ray scans.
Presently, the cost of an average CT scanner was $1.3 million U.S.
Since its introduction in the 1970s, CT has become an important tool in medical imaging to supplement X-rays and medical ultrasonography. Although it is still quite expensive, it is the gold standard in the diagnosis of a large number of different disease entities.
Diagnosis of cerebrovascular accidents and intracranial hemorrhage is the most frequent reason for a "head CT" or "CT brain". Scanning is done without intravenous contrast agents (contrast may resemble a bleed). CT generally does not exclude infarct in the acute stage, but is useful to exclude a bleed (so anticoagulant medication can be commenced safely).
CT is also useful in the setting of trauma for evaluating facial and skull fractures.
For evaluation of chronic interstitial processes (emphysema, fibrosis, and so forth), thin sections with high spatial frequency reconstructions are used. For evaluation of the mediastinum and hilar regions for lymphadenopathy, IV contrast is administered.
CT angiography of the chest (CTPA) is also becoming the primary method for detecting pulmonary embolism (PE) and aortic dissection, and requires accurately timed rapid injections of contrast and high-speed helical scanners. CT is the standard method of evaluating abnormalities seen on chest X-ray and of following findings of uncertain acute significance.
With the advent of subsecond rotation combined with multi-slice CT (up to 64 slices), high resolution and high speed can be obtained at the same time, allowing excellent imaging of the coronary arteries. It is uncertain whether this modality will replace the invasive coronary catheterization.
Abdominal and pelvic CT
Many abdominal disease processes require CT for proper diagnosis. The most common uses include diagnosis of renal/urinary stones, appendicitis, pancreatitis, diverticulitis, abdominal aortic aneurysm, and bowel obstruction. CT is also the first line for detecting solid organ injury after trauma. Oral and/or rectal contrast is usually administered (more often iodinated contrast than barium due to the tendency of barium to cause imaging artifacts that limit evaluation of abdominal structures).
CT is often used to image complex fractures, especially ones around joints, because of the ability to reconstruct the area of interest in multiple planes.